What You Need to Know About Outdoor Wood Burners
Outdoor wood burning stoves can be an economical solution to heat homes and businesses. They also help reduce the dependence on fossil fuels that are non-renewable and help to create a more resilient energy strategy.
Well-seasoned wood is essential for efficient burning. Unseasoned or green wood has a higher moisture content and may cause creosote accumulation, which can affect performance.
Efficient
Outdoor wood burners have been around for many years. They are an energy-efficient and eco-friendly method to heat your home. The typical design of OWBs encourages the slowing of the fire, making it cooler which results in less efficient combustion, and more smoke and creosote. These unburnt fuels can cause health problems, fire hazards, and affect the environment around them.
Additionally, the visible plume of smoke that OWBs produce could cause neighbors to voice their concerns and result in DEC (Department of Environmental Conservation) enforcement action. This type of public relations issue could have a serious impact on the value of your property and could even result in your OWB being shut down.
Crown Royal Stoves offers a line of EPA Certified outdoor wood furnaces called the Pristine Gasification Series that utilizes technology to boost the efficiency of combustion for a clean, smokeless burning. This is achieved by using a negative pressure air system that draws fresh, dry, hot, filtered air in from the bottom of the boiler and then pushes it back out through the chimney at a greater rate than traditional outdoor wood boilers. This is accomplished by the unique design of a multi-pass, water filled heat exchanger constructed from 409 Titanium Enhanced Stainless Steel.
When used properly, the Pristine Gasification Series OWB can attain an efficiency of 99% to create a cleaner, smokeless fire that requires less wood and produces fewer emissions than traditional OWBs. To maximize the performance of your OWB, it is important to only burn dry, clean, seasoned wood. It is recommended that you prepare your wood for six months or one year before burning it. This will ensure an efficient and clean burn.
In addition to improving the performance of your wood burner and enhancing the efficiency of your wood burner by performing the "dry burn" every week. This method reduces creosote which increases the efficiency of boilers and extends the life of your boiler. Lastly by adding a creosote removal stick every when you load your stove, you will be able to drastically cut the amount of creosote used. wood burning stoves uk is available through Wisconsin Wood Furnace.
Clean
A wood-burning stove can become very dirty from burnt soot particles. They are difficult to remove, so remove any buildup from the glass of your stove immediately. If the soot isn't removed, it will begin to harden and make it more difficult to remove. Using the right cleaning products for the job is vital however, you must also ensure that you're not damaging the glass's surface with anything that might scratch it. This could leave an area of weakness that could shatter the glass when it's exposed to extreme temperatures.
Before you begin cleaning your wood stove, it is important to ensure that it's not lit and completely cool. Make sure that you protect the area around it with newspaper. This will prevent the ash from leaking and staining surfaces.
Depending on the quality of the wood that you select, it can take up to a year for your stove to get properly seasoned. The wood that is properly seasoned will not only burn more efficiently, but will also produce less creosote. This is the substance that accumulates on your chimney, which reduces effectiveness and creating the risk of fire. If you're using unseasoned wood, or just beginning a new fire in your outdoor wood burner, the best thing to do is open the lower back door and scoop ashes out into a non-combustible bin every week.
It is also recommended to perform a sediment flush on your boiler at least every four years. This is a simple flush of five seconds from the drain valve on your boiler. This will remove any sediments that have accumulated in the system and will ensure that your boiler runs efficiently.
After you have cleaned the exterior of your outdoor fireplace it is time to clean it. Before you begin, it's crucial to cover the floor area surrounding the stove with newspaper. Wearing protective gloves and eyewear is an excellent idea. Also, you should have an ash container, a shovel container for ash and a scraping tool. To protect the refractory you should lay down a piece of cloth to shield it as you scrape away coal and ash deposits.
Easy to operate
Despite their popularity (they were among the 1990s' "it" trends, as were mullet haircuts) outdoor wood boilers, also referred to as outdoor furnaces or outdoor wood hydronic heaters are still often misunderstood. These units are not the same as the well-known EPA wood stoves, which are built to burn low temperatures and run continuously. They are able to produce more burning and produce more smoke. Some local governments restrict or ban their use.
OWBs are best suited to homes with high levels of insulation. Smoke that is thick and smoldering could cause annoyance to neighbors, which has led many OWBs to be shut down or even sued. To allow OWBs to function properly, they must be used with dry wood with a low moisture content. Utilizing unseasoned or green wood decreases efficiency, causes creosote to build up and may reduce the lifespan of the burner. A moisture gauge will allow you determine how long it takes for wood to dry.
Dual-stage wood gasification (OWGB) boilers however utilize a three-step process that utilizes more of the energy available in the wood. This means less smoke. These furnaces are more efficient than conventional OWBs and are suitable for various fuels. Wood gasification boilers require dry well-seasoned and well-seasoned firewood. The majority of wood can be seasoned in a year. Oak and other hardy trees could take as long as two years to mature. They are less water-based and have a greater density. This allows them to retain heat longer, increasing efficiency and reduce pollution. The EPA "Burn Wise" website and Cornell Cooperative Extension are great sources for homeowners to understand how to burn wood efficiently to reduce air pollution.
Low Maintenance
Modern outdoor wood stoves are engineered to be eco-friendly. In contrast to indoor wood burners which produce significant smoke, modern outdoor furnaces burn cleanly without the creation of excessive heat or carbon monoxide. They also require less wood to produce the same amount of heat as traditional stoves.
Outdoor wood burners require less maintenance and are more accepting of wood moisture content than indoor wood burning stoves. Outdoor wood burners are only suitable for wood that has been properly "cured" or seasoned. It can take a year or more for certain types of wood. It is crucial to make use of a moisture meter to measure the amount of water of your wood prior to loading.
During operation, it is important to check the system regularly for the accumulation of creosote. Creosote is a by-product of combustion, can build up in the chimney and flue when they are not cleaned regularly. It can be removed using the use of a special creosote remover that is poured into the flame. Regular cleaning of the flue and chimney will eliminate dangerous creosote, and boost efficiency.
In order to attain 99% efficiency in combustion, Crown Royal Stoves designed a brand new air flow technique known as Negative Pressure Gasification. Our EPA certified Pristine Series outdoor wood furnaces utilize this technology to pull air from the bottom, pushing all gasses through an insulated water surrounded secondary combustion chamber, which is easy-clean Turbulators to ensure a smoke-free and pollutant-free combustion.